Causes of Mouse Problems

When your mouse starts misbehaving, the problem is from only one part of the hardware, "the wheel" which would be the troubleshooting center. Its either the roller of the wheel is dirty, damaged or misplaced.

The mouse could have dropped on the floor or you've been using it without a pad thereby packing dirt into the wheel house and its rollers.

Solution

Capsize your mouse so that the wheel is exposed and use you fingers to twist to the direction of the arrow around the wheel, when done look inside you will see 1 projected wheel with a rim and 2 other flat rollers on the right and the top, just check that they are in proper position.

See diagram below to know how it's supposed to be:

When in position.

What you will do is to simply look for a sharp object like a key or screw driver, after this you will see some dirt around the wheel rollers; so remove all the dirt properly from the 3 rollers and blow the dirt away. After this your mouse will work perfectly.

It always happen like this, see the diagram above then try to put it in place and also make sure its free of dirt.

When you have trouble-shooted the mouse wheel rollers close it back by turning the cover around the wheel in the opposite direction. Check the connector of the mouse behind the computer and remove it and blow it with your mouth and connect it back to its position. Look for a good mouse pad and put it under the mouse, start using it immediately!

People will now start consulting you to help them work on their mouse and eventually you've become a mouse Techie.

Secondly check your phone accessories. Your phone should come with a USB cord from the manufacturer or if you don't have it, you can purchase one N/B the type for your phone.

Purchase the type of anti-virus you want to use, it should be in a disk, then follow this guidelines for the installation process.

1. Insert your USB cable to your phone and then the other end of the cable to the USB Port in your computer, your computer will automatically detect the new hardware found message and will also write the name of the drive
2. N/B To locate drive go to Start, Click on my computer you will see it on the list of drives. Click on it to gain access.
3. Insert the anti-virus disk into the CD-Rom drive and wait for it to open, if it doesn't pop up after one minute then go to my computer, click on the CD-Rom drive to open

Click on the anti-virus software from the disk it will come up with options such as like "Open" "Save" "Save As" then click on the save as option, direct it to the new drive detected by your computer, click "Save" to save it directly to the drive

1. To start the installation process make sure you have enough space on your phone memory card, if you don't have you can free some space in order to allow the installation to go on, then click on the anti-virus software from your newly detected drive to begin the installation process
2. After the installation, right click on each of the folders contained in your phone for e.g. my music, my pictures, my videos and other folders created by you. When you right click on each folder, you will see on the list of options "Scan with Anti-virus" click on it to start the scanning process, continue scanning each folder one by one to achieve the result.
3. You can choose to uninstall to free some space or you can keep it if you have enough space though

N/B to avoid damage to your phone always scan files you send to your phone.